If your toilet keeps running after a flush, you’re not alone—and it’s more than just a nuisance. A running toilet can waste hundreds of gallons of water per day, causing your water bill to skyrocket. For homeowners in Dallas, TX, the issue is all too common due to our hard water and aging plumbing systems. At Total Plumbing, we’re here to help you fix the problem quickly and affordably.
Let’s dive into what causes a toilet to keep running and how you can fix it—either on your own or with help from a local Dallas plumbing expert.
Why Your Toilet Keeps Running After You Flush
When a toilet runs continuously, the problem is usually with the components inside the toilet tank. Here’s a breakdown of the most common causes:
1. Faulty Flapper Valve
The flapper is the rubber seal at the bottom of the tank. If it’s worn, warped, or misaligned, it won’t seal properly—causing water to leak into the bowl continuously.
2. Float Issues
The float controls the water level in the tank. If it’s set too high or not functioning properly, water will keep flowing into the overflow tube, triggering non-stop filling.
3. Fill Valve Problems
A malfunctioning fill valve might not shut off when it should. Over time, this part wears out, especially in homes with hard water like we often see here in Dallas County.
4. Chain Too Tight or Too Loose
The chain connecting the handle to the flapper can be too short (holding the flapper open) or too long (getting caught under the flapper), both of which can cause your toilet to run.
DIY Steps to Stop a Running Toilet
Before calling a Dallas plumber, try these simple steps:
Step 1: Check the Flapper
Open the tank lid and inspect the flapper. If it looks damaged or worn out, replace it. This part is inexpensive and easy to install.
Step 2: Adjust the Float
If your float is a ball-style, bend the arm downward to lower the float. For newer models with a column float, pinch the clip and slide the float down.
Step 3: Inspect the Chain
Make sure the chain has just a little slack. If it’s too tight or too long, adjust the length so the flapper can open and close freely.
Step 4: Replace the Fill Valve
If adjusting the float doesn’t help, the fill valve may need replacement. Turn off the water supply, drain the tank, and install a new valve according to the manufacturer’s instructions.
If you’ve tried all of these and your toilet still won’t stop running, it’s time to call in the professionals.
Why Choose Total Plumbing for Toilet Repairs in Dallas?
We understand how frustrating plumbing issues can be—especially when they impact your water bill and daily routine. At Total Plumbing, we specialize in toilet repair services in Dallas and surrounding areas, offering:
✅ Fast response times
✅ Upfront pricing with no hidden fees
✅ Licensed, experienced plumbers
✅ Reliable repairs using quality parts
✅ Emergency plumbing services
We’ve been proudly serving Dallas homeowners for decades, and our 5-star reviews speak for themselves.
Don’t Ignore a Running Toilet – Here's Why
Ignoring a running toilet may seem harmless, but the consequences can be costly:
Water waste: A single running toilet can waste up to 200 gallons per day.
Higher bills: Expect to see a noticeable spike in your water bill if you delay repairs.
Hidden damage: Prolonged moisture exposure can lead to leaks or even structural water damage in some cases.
Fixing the problem today can save you money and headaches down the road.
Need a Plumber in Dallas? Call Total Plumbing Today
Whether you’re dealing with a toilet that won’t stop running, a leaky faucet, or a complete plumbing emergency, Total Plumbing is your trusted local plumbing company in Dallas, TX.
We’re just a call away and ready to fix your issue quickly and affordably. Don’t let a small plumbing issue become a big one—contact us today for expert service.
